Products

Contact Person : Ms. qu monica
Company Name : Leadingtouch Technology Co., Ltd.
Tel : 86-10-51090841
Fax : 86-10-51090979
Address : Beijing,beijing,JinShiQiao, LongXiang industrial center, HuiLongGuan, ChangPing District
Country/Region : China
Zip : 102208

resistive touchscreen controllers

Product Detailed

1, 5 wire Dual 232 and USB controller 2, Fully compatible with ELO 2216C(Dual) controller. 3, Use ELO driver and Leadingtouch

LeadingTouch 5020D, the newest controller supplied by Leadingtouch, is designed for 5 Wire resistive , can support full serials of 5 Wire resistive touch product and fully compatible with ELO 2216C(Dual) controller.

5020D providing Comb interface for both RS232 and USB with many superior advantages such as stable performance and fast reaction.

Model	5020D
Construction	Four-layer surface-mount design with internal ground plane for EMI suppression.
Dimensions	Total width: 1.38 inches (35 mm), including connectors
	Total length: 2.36 inches (60 mm)
	Total height: 0.47 inches (11.8 mm)
Supply Voltage	+5 VDC, nominal (+4.75 to +5.25V DC), and Current 50mA typical, 240mA maximum at +5 VDC.
Supply Voltage	Typical power dissipation is 500mW at 5V. Minimum power-supply 400 mA
USB Interface	Interrupt-type, full-speed USB device.
Operating Modes	Leadingtouch protocol
	Customer specific protocol
	Initial/ Stream/ Untouch Modes
Touch Resolution	4096x4096, size independent
Conversion Time	Approximately 10 ms per coordinate set
Reliability	MTBF greater than 1,543,000 hours per MIL-HDBK-217-F2
Temperature	Operating: 0°C to 65°C; Storage: -25°C to 85°C
Humidity	Operating: 10% to 90% RH, noncondensing; Storage: 10% to 90% RH, noncondensing
Operating Altitude	10,000 feet
Shock and Vibration	With Leadingtouch standard container, meet International Safe Transit Association project 2A test procedure.
ESD:	Per EN 6100-4-2 1995. Level 4, Contact Discharge - 8kV ; Air Discharge - 15kV positive and negative polarity
Flammability	94V0
LED Indicators	The 5020D controller has one LED status indicators. When 5020D controller initially connects to host, the LED will be constantly on. When touchscreen connects to 5020D, the LED will snuff out after 3 seconds and be constantly on during touch.
Agency Approvals	The touch system including 5020D controller, touchscreen and connection cable has certified with FCC Part 15. The touch system including 5020D controller, touchscreen and connection cable is compatible with EN55022 and EN55024 standards and is certified with CE

resistive touchscreen controllers

Other products

Dual RS232 and USB 5 Wire Resistive Touch Controller